PRODUCTS CENTER

E-mail: [email protected]

polyurethane air hose sizes chart

How to choose a compressed air hose in 4 steps - Topring

12/9/2019· Choose the inside diameter sizing based on the length of the compressed air hose (see Step 1) and on the air consumption of the pneumatic tool or equipment. For example, nailers and staplers operate with less than 0.10 SCFM/cycle, so a ¼-inch I.D. will do the job whether the hose length is 25 or 150 feet.

Pneumatic Hose/Pneumatic Air Hoses/Coiled Air Hoses/Air Hoses/ 1 4 Air Hose/ 3 8 Air Hose

Pneumatic hose, available in straight and coiled PUR and Nylon material, is perfect for delivery of air to moving machinery or tools. NITRA hoses come with pre-attached fittings on each end; note that as opposed to tubing, hose is specified by inner diameter.

Dash Sizing for Hoses and Tubes Explained - MFCP

Each dash size corresponds to a progressively larger diameter, measured in sixteenths of an inch. “-1” is 1/16, “-2” is 2/16, and so on. In this case, -6 hose would indie a hose with an inside diameter of 6/16”, or 3/8". In another example, a -10 tube would indie a tube with an outside diameter of 10/16", or 5/8".

Technical Information and Support - Russell Performance Pluing

Hose diameters are assigned AN nuers. Using your automotive hose size, choose from the chart below to find the AN equivalent for hose, hose ends and adapter fittings. For example: a 3/8" standard hose equals -6 AN.

Hose Flow & Sizing - Green Line Hose

Maximum recommended air flow in standard cubic feet per minute (scfm) as a guide in sizing hose and piping in compressed air systems. These are maximum recommended flow rates, and this chart is based on a maximum acceptable pressure drop of 15% per

Polyurethane Tubing Series TU/TIUB - SMC Pneumatics

Operating Fluid Air, Water Max. Operating Pressure 115 psi (0.8MPa) at 68˚F (20˚C) Burst Pressure Refer to burst pressure characteristic chart Operating Temperature Air: -4˚ to 140˚F (-20˚ to 60˚C) Water: 40˚ to 105˚F (5˚ to 40˚C) Material Polyurethane Hardness

Polyurethane Tubing Series TU/TIUB - SMC Pneumatics

Operating Fluid Air, Water Max. Operating Pressure 115 psi (0.8MPa) at 68˚F (20˚C) Burst Pressure Refer to burst pressure characteristic chart Operating Temperature Air: -4˚ to 140˚F (-20˚ to 60˚C) Water: 40˚ to 105˚F (5˚ to 40˚C) Material Polyurethane Hardness

Air Compressor Hose & Tube Guide - What Size? Air Tube & Hose Types & Fittings - About Air Compressors…

24/12/2018· Sizing Air Hose For Compressor Air Lines When you are trying to figure out what hose size you need, or even why a 3/4″ hose is well over an inch in diameter, just remeer the acronym H.I.D. The ‘H’ in H.I.D. stands for HOSE. The ‘I.D.” in HID stands for the hose

Parker Legris Technical Tubing & Hose

4 Technical Tubing and Hose PA Tubing (P. 10) Fluids: compressed air, industrial fluids Materials: – 2 polyamide grades (semi-rigid and rigid) – 7 colours Pressure: 58 bar Temperature: -40 C to +100 C O.D. metric: 3 mm to 16 mm O.D. inch: on request Fireproof

Going with the Flow: How to Choose an Air Hose | Nail Gun …

21/8/2019· While RolAir recommends using a 3/8” ID hose when possible, most people choose 1/4” ID hoses due to their lightness. As with inside diameter, fitting size comes in 1/4" and 3/8" sizes. Unlike hose ID, however fittings are sized by the threading of the fitting, or NPT. Fitting compatibility is determined by the air inlet size on the tool.

Pneumatic Hose - Polyethylene Tubing 1/4 OD | Polyconn

Polyethylene Tubing 1/4 OD. Click image to enlarge. *Please select the quantity for each item you wish to order and click the ''Add To Cart'' button below. Polyethylene Tubing 1/4 OD.

Chemical Resistance | Hose and Fittings Source

Even within hose temperature limits, end fittings and hose size can affect performance at higher temperatures. Service Conditions: A rubber compound usually swells when exposed to a chemical. Within a given percent of swell, a hose tube may function satisfactorily if the hose is in a static condition, but may fail quickly if the hose is subject to flexing.

For Pneumatic Piping Air Fittings & Tubing

Polyurethane 2.1-1 2.1-9 2.1-31 2.1-35 2.1-39 2.1-47 2.1-53 For Pneumatic Piping Air Fittings & Tubing One-touch Mini SeriesKJ Low-torque rotation Possible to use in vacuum1.3 10-2 Applicable tube Metric size Applicable tube Metric size Applicable tube

Hose Flow & Sizing - Green Line Hose

Maximum recommended air flow in standard cubic feet per minute (scfm) as a guide in sizing hose and piping in compressed air systems. These are maximum recommended flow rates, and this chart is based on a maximum acceptable pressure drop of 15% per

Dash Sizing for Hoses and Tubes Explained - MFCP

Each dash size corresponds to a progressively larger diameter, measured in sixteenths of an inch. “-1” is 1/16, “-2” is 2/16, and so on. In this case, -6 hose would indie a hose with an inside diameter of 6/16”, or 3/8". In another example, a -10 tube would indie a tube with an outside diameter of 10/16", or 5/8".

Polyurethane Pneumatic Tubing - AutomationDirect

polyurethane tubing is ideal for use with NITRA push-to-connect fittings. Features • Inch and metric sizes available • Seven colors - black, blue, clear, red, yellow, clear blue, and dark green (UV stabilized) • 00 foot and 500 foot package sizes, 100 and 250 1

Tubing FluidConnectors - Parker Hannifin

Hose A Tubing Thermoplastic B Coiled Air Hose & Fittings C Transportation D Fittings E Tooling, Equipment & Accessories F General Technical G Parker Hannin Corporation Parex Division Ravenna, Ohio parkeropFor detailed ordering information, please

Air Hoses | Amflo Air Hoses and Accessories | United States

Amflo offers the best in air hose materials and assortment, including our Ultra Air Hybrid hoses. We have all the lenghts and sizes across the different material types to suit your

Air Hose Buyer''s Guide - Rolair

4/10/2016· Polyurethane Hose – Sometimes referred to as poly hose, polyurethane air hose is considered an “all-around” option. It weighs less than comparable hybrid and PVC options, which is a factor you’ll appreciate after …

How to choose a compressed air hose in 4 steps - Topring

12/9/2019· Choose the inside diameter sizing based on the length of the compressed air hose (see Step 1) and on the air consumption of the pneumatic tool or equipment. For example, nailers and staplers operate with less than 0.10 SCFM/cycle, so a ¼-inch I.D. will do the job whether the hose length is 25 or 150 feet.

Hose Clamp Size Chart | AFT Fasteners

Hose clamp size chart for miniature SAE type "m", standard SAE type "f" and full-size hose clamps. Printable "PDF" SAE Hose Clamp Size Chart reference. Order your hose clamps today. Durability Torque 201/301 Stainless steel band & housing with zinc-plated

Hose & Coupling Reference Guide - Numeralkod

Flow Capacity Nomograph 5 Hose Selection Flow Capacities of erpillar Hose at Recommended Flow Velocities The chart below is designed and provided as an aid in the determination of the correct hose size. 1. determine flow and velocity of system; 2. find

Air Compressor Hose & Tube Guide - What Size? Air Tube & Hose Types & Fittings - About Air Compressors…

24/12/2018· Sizing Air Hose For Compressor Air Lines When you are trying to figure out what hose size you need, or even why a 3/4″ hose is well over an inch in diameter, just remeer the acronym H.I.D. The ‘H’ in H.I.D. stands for HOSE. The ‘I.D.” in HID stands for the hose

Polyurethane Tubing Series TU/TIUB - SMC Pneumatics

Operating Fluid Air, Water Max. Operating Pressure 115 psi (0.8MPa) at 68˚F (20˚C) Burst Pressure Refer to burst pressure characteristic chart Operating Temperature Air: -4˚ to 140˚F (-20˚ to 60˚C) Water: 40˚ to 105˚F (5˚ to 40˚C) Material Polyurethane Hardness

Pipe Air Flow - Parker Hannifin

TEC-15 Pipe Air Flow ISSUED: January, 1999 Supersedes: June, 1998 The following pages contain 6 sets of curves for schedule 40 pipe that can be used to help select the appropriate pipe size for pneumatic systems, or given a system, allow system performance

How to choose a compressed air hose in 4 steps - Topring

12/9/2019· Choose the inside diameter sizing based on the length of the compressed air hose (see Step 1) and on the air consumption of the pneumatic tool or equipment. For example, nailers and staplers operate with less than 0.10 SCFM/cycle, so a ¼-inch I.D. will do the job whether the hose length is 25 or 150 feet.

Hose Flow & Sizing - Green Line Hose

Maximum recommended air flow in standard cubic feet per minute (scfm) as a guide in sizing hose and piping in compressed air systems. These are maximum recommended flow rates, and this chart is based on a maximum acceptable pressure drop of 15% per

Polyurethane Tubing | Parker NA

Parker’s polyurethane tubing is flexible, kink-resistant and abrasion resistant. They are also available in multiple colours for system colour coding. They are equipped with medium and high durometers, enabling our tubing to deal with higher pressures and have

Poly Pipe Sizes & HDPE Pipe Sizes Australia made easy by Matrix …

In Australia, HDPE Poly Pipe sizes are measured by the outside diameter of the pipe in millimeters. There are a huge range of HDPE Pipe sizes, from 16mm outside diameter, right up to 2000mm outside diameter. Readily available diameters range from 20mm to 800mm outside diameter. You will likely find the following simple HDPE Pipe Sizes Chart

Parker Legris Technical Tubing & Hose

4 Technical Tubing and Hose PA Tubing (P. 10) Fluids: compressed air, industrial fluids Materials: – 2 polyamide grades (semi-rigid and rigid) – 7 colours Pressure: 58 bar Temperature: -40 C to +100 C O.D. metric: 3 mm to 16 mm O.D. inch: on request Fireproof